Golden Harvest V3 command button
Navigation Using Only One Momentary Button As mentioned above, all of the features of our board are accessible even with using only one momentary button. This button mode can be selected by setting the parameter "button_mode=4" in the "general.txt" file on your microSD card.
| FUNCTION | TRIGGERING WITH ONE MOMENTARY SWITCH |
| Power On | Tap the button |
|
Enter Effect Menu ∟ Change Blade Profile* ∟ Change On Top Effect* ∟ Save And Leave ∟ Change Standby Accent Profile* ∟ Enter Ignited Accent Submenu ∟ Change Ignited Accent Profile* ∟ Save And Leave |
Hold the button, then hold it again. Point the saber upwards while doing this. ∟ Slowly twist the saber ∟ Tap the button Hold the button until the confirmation sound is played Enter Accent Menu Hold the button, then hold it again. Point the saber downwards while doing this. ∟ Tap the button ∟ Hold the button for 1 s ∟ Tap the button Hold the button until the confirmation sound is played |
|
Enter Color Change Menu ∟ Cycle Through Preset Color Profiles ∟ Save And Leave |
Hold the button, then tap it. Point the saber upwards while doing this. ∟ Slowly twist the saber Hold the button |
|
Enter Lockup Mode ∟ Leave Lockup Mode |
Hold the button, release it and then twist the saber. Point the saber upwards while doing this. Tap the button |
|
Enter Drag Mode ∟ Leave Drag Mode |
Hold the button, release it and then twist the saber. Point the saber downwards while doing this. Tap the button |
|
Enter Melt Mode ∟ Leave Melt Mode |
Hold the power button, release it and then perform a stab Tap the power button |
|
Blaster Block |
Tap the button |
|
Force Push |
Hold the button while swinging the saber |
|
Activate Power Saving |
Hold the power button while performing a stab |
|
Deactivate Power Saving |
Hold the power button while performing a stab |
|
Power Off |
Hold the power button until the saber shuts down |
|
Enter Sound Font Menu ∟ Go To Next Sound Font* ∟ Jump 10 Sound Fonts Further* ∟ Save And Leave Sound Font |
Hold the button before the blade is ignited, then release it. Point the saber upwards while doing this. ∟ Slowly twist the saber ∟ Tap the button Hold the button |
|
Menu |
|
|
Show Battery Indicator ∟ Calibrate Battery |
Hold the power button while performing a stab before the saber is ignited ∟ When your battery is fully charged, perform a stab while battery level is displayed |
|
Enter Volume Control ∟ Adjust Volume ∟ Save And Leave Volume Control |
Hold the button before the blade is ignited, then release it. Point the saber downwards while doing this. ∟ Slowly twist the saber Tap the power button |
|
Start Background Music ∟ Skip Track ∟ Stop Background Music |
Hold the button while twisting the saber before the saber is ignited. Point the saber upwards while doing this. ∟ Quickly twist the saber Hold the button while twisting the saber before the saber is ignited |
|
Enter Saber Editor ∟ Select Editor Mode ∟ Color Profile ∟ Select Color Profile ∟ Edit Color ∟ Go To Next Saber State ∟ Revert Colors To Default ∟ Save Color Profile ∟ Confirm Selection ∟ Save and Leave Editor Mode ∟ Pixel Number ∟ Edit Pixel Number ∟ Save and Leave Editor Mode ∟ Ignition Speed ∟ Select Sound Font ∟ Edit Ignition Speed ∟ Save Ignition Speed ∟ Confirm Selection ∟ Save and Leave Editor Mode ∟ Retraction Speed ∟ Select Sound Font ∟ Edit Retraction Speed ∟ Save Retraction Speed ∟ Confirm Selection ∟ Save and Leave Editor Mode ∟ Battle Configuration ∟ Blaster Block Mode ∟ Button and Swinging ∟ Button ∟ Force Push Mode ∟ Button and Swinging ∟ Button ∟ Lockup Mode ∟ Button and Clashing ∟ Button ∟ Save and Leave Editor Mode ∟ Gesture Controls ∟ Stab Ignition ∟Turn stab ignition on ∟Turn stab ignition off ∟ Twist Ignition ∟Turn twist ignition on ∟Turn twist ignition off ∟ Swing Ignition ∟Turn swing ignition on ∟Turn swing ignition off ∟ Twist Retraction ∟Turn twist retraction on ∟Turn twist retraction off ∟ Go To Next Gesture Control ∟ Save and Leave Editor Mode ∟ Effect Font Slot ∟ Select effect font slot ∟ Save and Leave Editor Mode ∟ Save And Leave Saber Editor ∟ Confirm Selection |
Hold the button while twisting the saber before the saber is ignited. Point the saber downwards while doing this. ∟ Tap the button
∟ Slowly twist the saber ∟ Slowly twist the saber ∟ Tap the button ∟ Perform a stab ∟ Hold the button ∟ Tap the button ∟ Hold the button
∟ Slowly twist the saber ∟ Hold the button
∟ Slowly twist the saber ∟ Slowly twist the saber ∟ Hold the button ∟ Tap the button ∟ Hold the button
∟ Slowly twist the saber ∟ Slowly twist the saber ∟ Hold the button ∟ Tap the button ∟ Hold the button
∟ Slowly twist the saber clockwise ∟ Slowly twist the saber counterclockwise
∟ Slowly twist the saber clockwise ∟ Slowly twist the saber counterclockwise
∟ Slowly twist the saber clockwise ∟ Slowly twist the saber counterclockwise ∟ Hold the power button
∟ Slowly twist the saber clockwise ∟ Slowly twist the saber counterclockwise
∟ Slowly twist the saber clockwise ∟ Slowly twist the saber counterclockwise
∟ Slowly twist the saber clockwise ∟ Slowly twist the saber counterclockwise
∟ Slowly twist the saber clockwise ∟ Slowly twist the saber counterclockwise ∟ Tap the power button ∟ Hold the power button
∟ Slowly twist the saber ∟ Hold the button
∟ Hold the button |
| Wake Up From Deep Sleep | Tap the button |
| Reset | Hold the button for 10 s |
* When changing the On Top Effect, Background Effect or Sound Font, you can go to the next one by pointing your saber upwards during selection or to the previous one by pointing your saber downwards.